CONTROL CHOICES:
Flow, Drawdown, and Stabilization

Flow Rate
The new MP10 MicroPurge® basicsTM Controller revolutionizes sampling pump flow control by making it simple, stable, and repeatable.

Simple faster/slower keystrokes set the flow rate you want, smoothly and accurately. There's no overshooting or flow rate fluctuation that can disturb the well, and no danger of overheating the pump or your sample, as with electric pumps.

Optimized settings for each well are identified for easy recall later.


Drawdown
The unique, new MP30 MicroPurge basics Drawdown Control and Level Meter connects to the MicroPurge basics Controllers and automatically keeps well drawdown within the limits you choose.

If drawdown reaches the limit, the MP30 alerts you and signals the basics controller to pause purging until the well recovers.


Parameter Stabilization
The easy-to-use, new MP20 MicroPurge basics Flow Cell incorporates QED's exclusive PurgeScanTM technology (patent pending), which automatically signals stabilization of selected water quality parameters and stores purging data.

There's no need to plot curves or perform simultaneous calculations. And the molded, one-piece Flow Cell is designed with low volume and built-in stirring for quick response.



POWER CHOICES:
Compressors and Gas Cylinders

Power Options
The MicroPurge® basicsTM system provides new options to power your sampling equipment and extend your reach.

Whether you can drive right to the wells, need an air hose extension, or require portable equipment for remote locations, this system has all the right choices for your sampling program.

Oilless Compressors
The new, lightweight MP40 engine-driven compressor packs all the power you need into a tough, compact unit that weighs only 48 pounds. Powered by a 4.0 HP Honda gasoline or propane engine, the MP40 is housed in a rugged, welded aluminum cage for protection and easy handling.

An optional Cart Kit and/or 200' Extended Reach Air Hose Reel can increase your mobility greatly.

Electric Compressor
For even lighter travel, QED's 15 pound, proven 3020 Electric Compressor is a convenient, reliable air source. The 12VDC compressor can even be powered by your vehicle's battery.

Compressed Gas Cylinders
MicroPurge basics equipment can also be used easily with your existing compressed air, nitrogen, or CO2 cylinders.




CONTROL & POWER
in one compact unit

A new, self-contained controller/ compressed gas backpack, the MP15 Control & Power Pack is a complete sampling system with one-person portability. The hands-free unit allows sampling personnel easy access to the most remote sites. Liquid CO2 cylinder provides hours of pumping capacity. Bypass air fitting permits use of other air sources at closer wells.
System Specifications
Well Wizard® Bladder Pumps
Value leader in accuracy, durability, and reliability.
- Proven superior over 18 years, 50,000+ wells worldwide.
- Available in stainless steel, PVC, Teflon®
Length: 1.25-3.8 ft. (38-116 cm); O.D. : 1.00-1.66" (2.54-4.22 cm); Volume: 100-495 ml; Max. Lift: 250-1,000 ft. (75-300 m).
MP10 basicsTM Controller
Microprocessor-based advanced logic puts easy 1-2-3 system control at your fingertips.
- Simple up/down arrow keys adjust flow rates, with manual on/off control for sample collection.
- Automatic drawdown control when connected to MP30 Drawdown Meter.
- Compact, rugged, lightweight; allows easy recall of optimized settings for next sampling round.
Dimensions:10-3/4"x9-3/4"x5" (27x25x13 cm); Weight: 5.5 lb. (2.5 kg); Max. Pressure: 120 PSI (8,275 kPa); Max. Pump Depth: 250 feet (76 m); Power: 3 "AA" batteries.
MP15 basicsTM Control & Power Pack
Backpack unit does it all, combining simple control and a quiet, portable compressed gas source.
- At just 27 pounds, it makes remote monitoring wells easier than ever to reach and sample.
- Automatic drawdown control when connected to MP30 Drawdown Meter.
- Pumps up to 7 hours continuously at 50 feet on a single cylinder of CO2.
Dimensions: 25-1/2"x12-1/2"x10" (65x32x25 cm); Weight: 27 lb. (12 kg); Max. Pressure: 120 PSI (8,275 kPa); Max. Pump Depth: 250 Feet (76 m); Power: 3 "AA" batteries; Cylinder: 5 lb. (2.3 kg) CO2.
MP20 basicsTM Flow Cell
Measures purge water indicator parameters in-line; compact, more portable size (50% smaller).
-PurgeScan technology (U.S. Patent No. 6,415,659) provides automatic stabilization alert, with visible and audible signals.
- Displays 7 parameters- temperature, DO, specific conductivity, pH, ORP, turbidity, salinity.
- Engineered flow cell with automatic stirring for quicker, more accurate response.
Overall Dimensions: 18-1/2"x15"x6-1/2" (47x38x17 cm); Weight: 14 lb. (6.4 kg); Power: 3 "C" batteries; Sonde: 3"x9" (8x23 cm), 1.3 lbs (0.6 kg); Meter: 3.5" (9 cm) Display, 2.1 lb. (1 kg); Memory: 100 Data Frames.
MP30 basicsTM Drawdown & Water Level Meter
Prevents excessive drawdown during low-flow sampling; also functions as a standard level meter.
l - Allows setting of drawdown limit, with link to controller for automatic interruption of purging when limit is reached; pumping resumes when well recharges.
- Rugged polyethylene-coated steel tape provides durable performance, accuracy to 0.01 feet.
Overall Dimensions: 14"x10-1/2"x8" (37x27x20 cm); Weight: 7 lb. (3.2 kg) w/ 150' tape; Power: 9 volt battery; Probe: 5/8" O.D. x 7.5" L. (1.6 x 19 cm); Tape Length: 150 or 300 feet (46 or 91 m).
MP40 basicsTM Engine/Compressor
Compact, oil-less compressor provides long-term durability and easy starting.
- Ruggedized for tough field conditions, with shock-absorbing feet and a welded aluminum cage.
- Direct-coupled engine/compressor set decreases weight and minimizes vibration.
- Model 3020 Electric 12 VDC Compressor available as a lightweight (15 lb.), low-output air source.
Overall Dimensions: 14"x18-1/4"x18-1/2" (36x46x47 cm); Weight: 48 lb. (22 kg); Power: 4.0 HP Honda gasoline or propane engine; Max. Pressure: 125 psi (8,620 kPa); Output: 7.0-2.2 CFM (11.9-3.74 m3/h) @ 0-125 psi, 20' air hose.